Hybrid PV/BESS Power Plant
Hybrid PPC with accurate simulation models in PSCAD and PSSE, supporting GPS compliance studies across five operating scenarios combining solar and battery storage.
Hybrid
PPC + Models
5 Scenarios
Projects
Hybrid PPC with accurate simulation models in PSCAD and PSSE, supporting GPS compliance studies across five operating scenarios combining solar and battery storage.
Hybrid
PPC + Models
5 Scenarios
Integrated Master PPC and SCADA system delivering high reliability and operational flexibility for the entire solar power plant.
39 MW
Master PPC
Full SCADA
R1 compliance study and dynamic model acceptance testing for a large-scale BESS connected at 220 kV, meeting all generator performance standards requirements.
200 MWh
220 kV
R1 Compliant
R0 simulation studies and grid impact assessment covering frequency response, voltage control and fault ride-through for generator performance standards compliance.
80 MW
R0 Studies
PSCAD + PSSE
Grid connection study support for a large battery: PSS/E model tuning, NEM case studies, P/Q curve calculation and PSCAD models prepared in the required template format.
500 MWh
PSS/E + PSCAD
Ongoing
P/Q capability curve assessment and NEM case GPS studies for clause S5.2.5.5, covering the response to disturbances following contingency events.
100 MWh
P/Q curves
S5.2.5.5
Steady state grid impact assessment, P/Q capability curve calculation and NEM case GPS studies for clause S5.2.5.5.
100 MWh
Steady state
S5.2.5.5
Site models developed in PSCAD for two 4,998 kVA battery and SVG sites, with simulation studies and reports for the connection process.
2 sites
4,998 kVA
PSCAD
PSCAD EMT model developed for a 100 kW battery power conversion system, tested and validated against AS/NZS 4777.2 test measurements, with a sample DMAT.
100 kW
PSCAD EMT
AS/NZS 4777.2
PSCAD and PSS/E models adapted to AEMO’s Power System Model Guidelines and Dynamic Model Acceptance Test Guideline, followed by a full DMAT.
PSCAD + PSS/E
AEMO
Full DMAT
Master Power Plant Controller and SCADA for the largest wind power plant in ASEAN, featuring 133 turbines with centralised grid compliance and dispatch control.
600MW
133
Master
BoP SCADA, EMS, Microgrid Controller and Master PPC integration for a hybrid solar PV and battery energy storage system, enabling seamless grid-connected and islanding operation.
33MWp
7MW
BoP
Operations Control Centre providing centralised monitoring and control across multiple high-voltage substations, with integrated SCADA dashboards and real-time asset management.
Multi-site
HV
Real-time
Intelligent Microgrid Controller integrating PV, BESS, diesel generators and grid connection with seamless on-grid, off-grid and black-start transition capabilities for C&I applications.
PV+BESS
On/Off
Black
Comprehensive off-grid power solution combining 45.3MW diesel gensets with solar PV and BESS, providing stable baseload power with renewable energy integration for remote industrial operations.
45.3MW
Solar
Off-Grid
SCADA, Energy Management System and Power Plant Controller for a commercial hybrid PV and BESS installation, optimising energy dispatch and grid interaction for maximum ROI.
SCADA
Hybrid
C&I
Three adjoining plants sharing one connection point, with plant control, SCADA and the grid interface delivered as a single system. Export limits and setpoints are coordinated across all three so the connection point behaves as one generator.
550 MWp
660 ha
3
Station and bay level automation, protection and SCADA for the substation and the 220 kV connecting lines, tested end to end and taken through to energisation with the network operator.
500 kV
220 kV
Energised